Swing Gate Post 100x80

• - it is used when there are no concrete columns and it is necessary to concrete the metal post in the ground.
• - the post must be at least 800mm higher than the height of the gate it supports.
• - has welded metal plates on which the adjustable hinge is fixed.
• - after welding, the post is subjected to hot-dip galvanizing process.
• - after galvanizing, the post is powder coated in electrostatic field and treated in the curing oven at 200°C.

Additional Swing Gate Posts 100x80

• - the additional post is used only for pathway gates
• - it is used when concrete columns are not present and it is necessary to concrete the metal post in the ground.
• - the post must be at least 800 mm higher than the height of the gate it supports.
• - has no metal plates welded to it .
• - the post is subjected to hot-dip galvanizing process
• - after galvanizing, the post is powder coated in electrostatic field and treated in the curing oven at 200°C.
• - plastic plugs included.

Swing Gate Post 80x40

• - it is used when there are concrete columns.
• - has special holes perforated for fixing it to concrete with metalic anchors.
• - has welded metal plates on which the adjustable hinge is fixed.
• - after welding, the post is subjected to hot-dip galvanizing process.
• - after galvanizing, the post is powder coated in electrostatic field and treated in the curing oven at 200°C.

Additional Swing Gate Posts 80x40

• - the additional post is used only for pathway gates
• - it is used when there are concrete columns.
• - has special holes perforated for fixing it to concrete with metalic anchors.
• - has no metal plates welded to it .
• - the post is subjected to hot-dip galvanizing process
• - after galvanizing, the post is powder coated in electrostatic field and treated in the curing oven at 200°C.
• - plastic plugs included.